top of page
Search

Raise your Temp and/or Slow your Speed - How to Print PLA

Tangled PLA should be printed at:


200-235C if printing at 35-50mm/s (Old Prusa or Creality)

235-255C if printing at ~100mm/s (BambuLab High Speed)


This has come up a bunch. Tangled PLA is not a preset on your printer. It is a different material. You will likely have to change presets on your machine.


 
 
 

Recent Posts

See All
Price Decrease for Non-Member Filament

OK. So non-members of Tangled have had a bit of a different pricing. Since we can't predict demand through the subscription is has been a bit more expensive. But over the last few months we have been

 
 
 
10$ Filament Made in the USA For Christmas

That pretty much says it. Tis the season for a promotion. We have been working hard all year. And we have stored up a bunch of filament. And while we don't think this is a reason that anyone should bu

 
 
 
Someone Tested Tangled Filament

So we had a customer Reach out about Tangled. We'll just share his email and his data here for you. Not to shortcut it. But Tangled was pretty darn good. " Overall, the Tangled Filament black performe

 
 
 

6 Comments

Jim Hillier
Jim Hillier
Sep 08

I'm a new member and just received my first order. 3 spools of black.

Haven't opened the bags yet but there appears to be no dessicant. And they are not vacuum packed. Just sealed. Am I gonna have to invest in a dryer now?

Like
iam.sometimes
May 30

FYI: using 255oC on my P1S at 300mm/s and 29mm3/s (0.4 nozzle, 0.2 to 0.28 layer height, E3D HF Obxidian hotend), and bed temp raised from 55 to 60oC. Just randomly picked these values, without calibration or extensive tests. Has worked well so far (~12 prints, 12 hours total).

Like
lalahsghost
lalahsghost
May 04

Would love to have a filament profile for Bambu printers available for download.

Like
Jonathan Lin
Jonathan Lin
Feb 02

I keep having issues with partial clogs with a brand new nozzle. I've tried 210 to 255 with my X1C with 100m/s and the door open and closed. I like to print at 5 perimeters and am having no luck...

Like
iam.sometimes
May 26
Replying to

Surprising. Am printing at 300mm/s without any problem (P1S ~1000 hours old, 0.4 E3D HF Obxidian nozzle, 19mm3/s to 29mm3/s, 0.2 to 0.28 layer height, 255oC, 3 perimeters, 60oC bed).

Have to slow down to 100mm/s on 50o overhang perimeter corners, though, as the filament curls up. But same issue with Bambu's basic PLA & ABS.

Like
bottom of page